Shop Surf

IDEAL WATER TEMP : 49˚ - 58˚ F

CHANNEL FLEX - WEIGHTLESS, UNRESTRICTED STRETCH

• ALL NEW CELLIANT BLACK - STAYS WARMER
• QUICK-DRY FIBERS - STAYS DRIER
• DRYLOCK ANKLE SEALS - LOCKS WATER OUT
• ERGO STRAP DESIGN - LESS PRESSURE
• PULL UP ANKLE LOOP EASY ENTRY
• TAITEX OUTER SEAM - DURABILITY
• TAPED SEAMS - DURABILITY
• 3 DIMENSIONAL FOOT MOLD - CONTOURED FIT
• SINGLE RUBBER BOTTOM - DURABILITY WITH BOARD FEEL

Made for cold water: 44° F and colder
The Vissla Surf Bootie fit is true to shoe size; see size chart in images above. The boot should fit snug to prevent water from entering.

WARMTH & STRETCH
• 100% Super Stretch neoprene - lighter, warmer, softer, stretchier, easier to put on and take off
• Full thermal hallow fiber lining insulates heat and dries fast

FIT
• Thin softgrip sole design allows for a better, true-to-the board feel
• Strapless compression panels keep the boot snug to your feet without having to have the restricting velcro strap
• New feature! Pull tab on heel for easier entry

DURABLE & WATERTIGHT
• Glued and blindstitched seam construction

Australia's leading Surf Wax! Mrs. Palmers ultra sticky surf wax was established in 1988 and caters to all surfers, from beginners to the elite pros. Mrs Palmers surf wax includes a traction additive that not only increases the stick factor but also won't wear out in the water; this results in a longer lasting, stickier wax that will keep your feet glued to your board.

Mrs. Palmers is not just excellent surf wax, it's probably the most practical wax for two cool reasons. First, it comes in a convenient cardboard box - not a plastic shrink wrap that requires a machete to open or a wrapper that leaves the wax exposed to melt or get dirty - so the wax is protected, as is whatever you carry it in. The second reason is that the bars are split, so you can break them in two, making it easier to carry in your surf trunks or slip in the leg of your wetsuit.

WATER TEMPERATURE

• Cool/Cold : Below 58F / Below 14C

The side fins have a wide base that narrows out at the top of the template. This provides drive and speed while the slightly more narrow tip makes it more responsive. The rake allows for drawn out turns and the slightly smaller center fin gives you that release off the top. Perfect combo. If you can only have one set of fins, the CF Series is a great choice!!

The first traction added wax that broke away from the paraffin based waxes. Sticky Bumps is a long lasting and easy to apply formula.

Features:

• A combination of the Cool & Cold formulas, allowing sticky grip in a wider range of water temperatures
• Long-lasting
• Easy to apply
• Boxed individually for clean transport and easy access

Temperature Range:

• 68 degrees Fahrenheit and below

The food-grade silicone formula preserves rubber gaskets and neoprene, to make expensive dive gear last longer. Lubricate sensitive rubber parts and protect neoprene dive equipment from salt, corrosion and oxidation, with the Silicone Lubricant Spray by GEAR AID.

• Lubricates – Allows for ease of suit entry
• Protects – Fights against rust, salt, oxidation and corrosion
• Conditions – Keeps neoprene and rubber supple and looking good
• Powerful – High qualitysilicone lubricant spray
• All-purpose – Use wetsuits, gaskets, o-rings, and all dive equipment

This is the ultimate protective garment for any Waterman! Perfect for changing into our out of your wetsuit on chilly days, the fully wind-proof and water-proof Waterparka is lightweight yet extreeeeemely protective and warm for cold morning surf checks or gusty boat rides. This is made from a bonded polyester fleece and is only one layer. It is long enough to protect you while bending over, changing your wetsuit under, or wearing it to protect your car seat from your soggy suit. Guaranteed to keep you warm and comfortable in almost any situation, whether you're surfing just down the road, diving in the tropics, or taking the boat out for a sunset cruise. The Waterparka is designed to protect you from the harsh elements, yet still "breathes" so you won't overheat. Why not enjoy your time near the water hanging out at the perfect temperature instead of shivering and dreaming of the hot shower? Brave the elements in your Surf-fur Waterparka!

Features:

• Windproof
• Waterproof
• Breathable
• Bonded TPU fleece
• Longer back hem for added protection
• Hidden slit pockets allow hands to easily access interior for quick changes
• Built in neck warmer
• Inner velcro pocket
• Reversible
• Machine washable
• Quick Dry

Features:
- Repairs both Epoxy and polyester boards
- Upgraded Formula
- Non-Yellowing
- Odorless
- Easy to Sand
- Super Strong
- Made in USA

Kit includes:
- 1 oz SunCure Epoxy Fiberfilled Resin
- Sanding Pad (2 grades - 80 grit & 120 grit)
- 3 Wooden applicators
- 2 Mylar cover sheets with tape ttickers

Fiberglass cloth is used to provide support and add strength to resin for larger repairs. This premium quality fiberglass cloth is a 4 oz. weight and measures 1 yard long by 27" wide. Safe and easy to use, it can be cut to accommodate any size repair.

AXIS X= SEALED WARMTH AND STRENGTH

MATERIAL

• NEW PLUSH THERMO LITE INFRARED NECK TO ANKLE
• 100% HIGH-PERFORMANCE STRETCH
• SUPERPRENE JAPANESE LIMESTONE
• GLIDE SKIN COLLAR
• DOPE-DYE YARN

DESIGN

• WATERTIGHT ZIPPER
• ENGINEERED FIT SYSTEM

CONSTRUCTION

• TRIPLE GLUED AND BLIND STITCHED SEAMS
• "S" SEAL UPPER BODY
• FUSIONX TAPE LOWER BODY
• WATER BASED GLUE

Product Details

Specs

• The Chemistry surfboard fin was designed by the Chem Crew with art by Paser. "The Chemistry "Colab 2" is a template that we designed for the high performance surfer who wants drive and the right amount of release. With it's wide base, smooth rake, and medium sized tip, The Colab 2 goes well in all types of surf. This fin is a med/large fin with a 4.49" base and 4.73" height."

  • Size: Medium 140-190 lbs.

    Compatibility:FCS, FCSII

    Construction: Honeycomb

    Flex: Medium

    Front Height: 4.73 Base: 4.49 Area: 14.99 Foil: Flat

    Rear Height: 4.73 Base: 4.49 Area: 14.99 Foil: 50/50

SIZE CHART IN PHOTOS ABOVE

Style : ERJW103030

The model is 175cm/5'9" tall and wears a size 6 in the photo

Features

• F'n LITE neoprene made with air-cell-rich limestone for lightweight warmth

• Thermal Smoothie on chest and back panel retains heat and blocks wind

• WarmFlight® x1 Far-Infrared thermal lining on chest & back panel transforms body heat into infrared energy to generate & maintain warmth

• Liquid Flex Seal (LFS) taped seams for comfort and zero leakage

• GBS (glued and blindstitched) seams for maximum flexibility and minimal water entry

• Seam taping at critical zones

• Chest zip entry with PK® #8 plastic zip

• Supratex knee pads, durable, lightweight & flexible

• Drainage holes

• Suitable for water temperatures of 11°C 14°C / 51°F 58°F

• This is a guide only: Weather, sensitivity to the cold & conditions at your local break will affect temperatures & choice of equipment

• Weight: 1.25 kg

Composition

92% Nylon/Polyamide, 8% Elastane

DIMENSIONS

NOSE: 15 1/2"
WIDTH: 21 3/4"
TAIL: 14 3/8"
THICKNESS: 3"
VOLUME: 56.6 L

Beautiful outlines combined with relaxed nose rockers, classic roll to V with double concaves in the tail combine to give you that “easy in” with loads of rail-to-rail performance.

This is a board that can fill so many slots in your quiver and would even be a solid choice as your only board. Wide enough, with enough volume to work well in average surf, The Cheater also lights up when the power comes on.

Progress from your longboards with The Cheater
A solid choice as an all-around board for almost all conditions and abilities, it is just as much a perfect board to transition down with from your regular longboard.

Built with NSP’s Shapers Union Custom Surf Epoxy (CSE) lay-up, we came up with a unique glassing schedule for The Cheater, instead of a one-size-fits-all technology. It features a clear UV-stable resin and satin rub finish and combined with a CNC-cut EPS core, laminated with full 6+4oz deck and 6oz bottom, a 4oz fin patch, a 6mm wood stringer, bottom carbon stringer, and carbon-reinforced tail, giving you a mid-length board with great flex and performance that feels light and responsive.

The Cheater comes in a 4+1 fin configuration enabling you to be creative in your set-up as a quad or thruster. NSP positioned the Surf 10 fin box slightly further back to make it available for a thruster setup.

Available with FTU fin boxes and compatible with Futures® Fins (fins not included)

* 4oz. Resin

* hardener

* fiberglass cloth

* 2 × 2 grade sanding sponge

* mixing sticks & cup

* Q-Cell Filler

* mini tube of Sun Cure Fiberfill resin

* cover sheets

* instructions

- 2oz. Ultra Clear SunCure Resin - Non-Yellowing

- 15cm x 34cm Fiberglass Cloth patch

- Sanding Pad (2 grade - Smooth 120 grit / Rough 80 grit)

- 1 Cup & 3 Mixing Sticks ( Cup is used for mixing chopped cloth to resin to make a filler for small dings)

- 1 Cover Sheet and tape stickers - ( Used to tape over small filler repairs for smooth surface, after 5 minutes sun exposure)

DESCRIPTION

High-quality Stainless Steel Smart-Screw and plate.

Smart-Screw head accepts industry-standard side-fin tools, which come standard with most board shorts today.

Smart-Screw and plate fit industry-standard center-fins and boxes.

NO DRAG, never compromising fin performance…unlike old screw and especially unlike “thumb” screws.

Goodbye screwdriver! Replacing your old screws with the Smart-Screw means never having to use a screwdriver and never again being frustrated that you forgot your screwdriver. One tool does it all!

Adjusting your center-fin in the water is simple, allowing you to compensate for rising or falling tides and swells without leaving the line-up.

Surf with confidence that your expensive center-fin is mounted stronger than “thumb” tight.

So inexpensive, you can afford to purchase several…one for every center-fin you own, replacements for travel, and one for your best mate.

Cool Temp Wax.

• Specifications

  • Designed for day use.
  • 5mm padding.
  • Molded non-corrosive zippers.
  • New expanded fin gusset.
  • New upgraded 420d super light ripstop nylon on top.
  • Semi-reflective/heat resistant 266PE on bottom.
  • Custom Pro-Lite print panels.
  • Top zip flip top opening for ease in sliding your board in and out of the bag.
  • Strap pocket to stow strap and accessories during travel.
  • Padded shoulder strap with Velcro closure system.
  • Padded handle for extra comfort.
  • External wax/key pocket.
  • Fixed size hang tag.
  • Inner storage pocket.
  • Reinforced nose.
  • Rail guard around the zipper to protect your board.
  • Closeable vent to allow air flow to keep your board cool.
  • Keep in mind that the bag is "cut" 26.5" wide and will fit most boards 23 1/2" wide or less depending on thickness.
  • This bag is cut close to 3" long so you don't have to size up.
  • Empty bag weight 3-5lbs depending on size.

• Super Stretch Neoprene 1mm Body
• Super Stretch Neoprene 0.5mm Upper Sleeves
• TDC Smart Fiber 4-Way Stretch Under Sleeves
  • Celliant’s clinically proven, mineral enhanced Smart Fibers convert body heat into infrared energy for better circulation, core temperature regulation, and increased tissue oxygen levels, enhancing endurance and speeding recovery.
• Adjustable Waist with a SmoothSkin Seal
• Loop It Or Lose It! Tie loop
• Elastic Cord/Cinch

Made out of durable material that can stand up to harsh conditions, you can carry your life saving essentials as well as have a way to save someone's life.