Great Lakes tested and Great Lakes approved. The Xcel Infiniti 8mm is the thickest wetsuit boot money can buy. Stay warm out there!

The Xcel 8mm boot is fully lined with Quick Dry Lining and features 100% UltraStretch neoprene, a glued & blindstitched seam construction sealed with inner Thermo Dry Seam tape, and outer Taitex to keep warmth in. The adjustable Velcro ankle straps allow for a comfortable, snug fit. Even the back ankle pull loop is pressure bonded to the outer boot, which keeps even more water out since no stitching ever penetrates through the boot neoprene.The slightly thinner sole design allows for a better, true-to-the-board feel. It's the premier cold water surfing boot!

• PLUSH THERMO LITE
• QUICK DRY FIBERS
• NEW MOLDED STRAP
• PULL UP ANKLE LOOP
• SINGLE RUBBER BOTTOM
• TAPED SEAMS
• ENGINEERED DESIGN

Great Lakes tested and Great Lakes approved. The Xcel Drylock wetsuit series has been used for over a decade in the coldest waters. Stay warm out there!

The most advanced wetsuit surf glove on the market, the Drylock features revolutionary TDC Thermo Dry Celliant, Xcel's warmest inner lining ever. TDC features mineral-enhanced smart fibers that recycle body heat into infrared energy for greater warmth, increased endurance, faster recovery, and enhanced overall performance. The exclusive, seamless, tapered Drylock wrist seals form the ideal fit with your wetsuit and help prevent flushing. Full "Gripper" palms ensure great traction and grip; the Texture Skin outer back hands provide excellent wind resistance. 100% UltraStretch neoprene, with glued & blindstitched seams sealed with outer Taitex for maximum warmth.

• ALL NEW CELLIANT BLACK = STAY WARMER
• QUICK DRY FIBERS = STAYS DRYER
• ENGINEERED DESIGN = CONTOURED FIT
• TEXTURED OUTER SKIN = WIND-RESISTANT
• TAITEX OUTER SEAM = DURABILITY
• GRIP PALMS = TRACTION ON BOARD
• DRYLOCK WRIST SEALS = LOCKS WATER OUT

Made for cold water: 44° F and colder
The Vissla Surf Bootie fit is true to shoe size; see size chart in images above. The boot should fit snug to prevent water from entering.

WARMTH & STRETCH
• 100% Super Stretch neoprene - lighter, warmer, softer, stretchier, easier to put on and take off
• Full thermal hallow fiber lining insulates heat and dries fast

FIT
• Thin softgrip sole design allows for a better, true-to-the board feel
• Strapless compression panels keep the boot snug to your feet without having to have the restricting velcro strap
• New feature! Pull tab on heel for easier entry

DURABLE & WATERTIGHT
• Glued and blindstitched seam construction

DESCRIPTION

Thermo-X layering fabrics provide incredible insulation with low bulk and quick-dry properties.

• Maximum Base-Layer Insulation
• 4-Way Stretch Fabric
• Water Repellency
• Rash Protection
• Strategic Seam Placement
• Super Low Neck: No Interference with Wetsuit Neck
• Boardshort Connector
• 220g Nylon/Spandex with HyperDry for maximum insulation and minimal water absorption
• Thermo-X HyperDry
• Flatlock Stitched Breathable Seams

• Super Stretch mesh neoprene for the ultimate in comfort
• Chill² Breaker mesh skin blocks evaporative cooling²
• 100% Sealed Seams for ultimate warmth in cold conditions
• Our warmest and best selling glove

Great Lakes tested and Great Lakes approved. The Xcel Drylock wetsuit series has been used for over a decade in the coldest waters. Stay warm out there!

The best cold water surfing bootie in the world, period. The Xcel Drylock 7mm Round Toe boots are the next best to surfing barefoot. A brand new design includes a 3D foot mold for an ergonomic fit, and Celliant Black TDC smart fabric for extra lightweight warmth. A single-layer, durable rubber sole provides crazy traction and board feel. Drylock ankle seals keep water out, and a new strap design creates more comfort, less pressure. All you need to light it up in cold waters.

• CHANNEL FLEX - WEIGHTLESS, UNRESTRICTED STRETCH
• ALL NEW CELLIANT BLACK - STAYS WARMER
• QUICK-DRY FIBERS - STAYS DRIER
• DRYLOCK ANKLE SEALS - LOCKS WATER OUT
• ERGO STRAP DESIGN - LESS PRESSURE
• PULL UP ANKLE LOOP EASY ENTRY
• TAITEX OUTER SEAM - DURABILITY
• TAPED SEAMS - DURABILITY
• 3 DIMENSIONAL FOOT MOLD - CONTOURED FIT
• SINGLE RUBBER BOTTOM - DURABILITY WITH BOARD FEEL

Great Lakes tested and Great Lakes approved. The Xcel Drylock wetsuit series has been used for over a decade in the coldest waters. Stay warm out there!

Made with XCEL's new Celliant Black technology, the XCEL 5mm Drylock Celliant Round Toe Boots feature smart fibers that enhance your body's ability to retain warmth, and even help keep your blood flowing. Easy to put on and contoured to fit your feet, these booties will come in extra handy when the water is getting downright cold.

• ALL NEW CELLIANT BLACK = STAY WARMER
• QUICK DRY FIBERS = STAY DRYER
• TAITEX OUTER SEAM = DURABILITY
• DRYLOCK ANKLE SEALS = LOCKS WATER OUT
• ERGONOMICALLY ANGLED HOOK-AND-LOOP STRAP = LESS PRESSURE
• PULL UP ANKLE LOOP = EASY ENTRY
• 3 DIMENSIONAL FOOT MOLD = CONTOURED FIT
• SINGLE RUBBER BOTTOM = DURABILITY WITH BOARD FEEL

DESCRIPTION

Xcel has designed hoods for decades, and this year’s all new Drylock is the best yet. Thermo Dry Celliant smart fabric, which refracts your body heat, returns in an improved form, using an enhanced Celliant Black mineral formula for even more warmth. Quick dry fibers add comfort to the mix: no heat lost by putting on a cold, wet hood.

• DRYLOCK - UNMATCHED WARMTH AND PERFORMANCE
• ALL NEW CELLIANT BLACK = STAY WARMER
• QUICK DRY FIBERS = STAY DRYER
• ENGINEERED DESIGN = CONTOURED FIT
• SOFT GLIDESKIN OUTER = WIND-RESISTANT
• TAPED SEAM = COMFORT AND DURABILITY
• CINCH AND SMOOTH-SKIN SEAL = LESS FLUSHING
• LOW PROFILE BILL = BETTER VISUAL
• GLUED AND BLINDSTITCHED = DURABILITY

DESCRIPTION

Our newest top of the line 2MM long sleeve jacket featuring Radiant Rebound, Xcel's metallic technology, in the upper body that utilizes a metal lining under the textile that blocks cold temps from penetrating the outer layer and reflects heat generated within the wetsuit back towards the body, keeping you in a constant state of warmth.

Enhances Overall Performance

100% Performance Stretch

Glued and Blindstiched Seams

No zippers for simple, fast on/off

Loop It Or Lose It! tie loop, and elastic cord/cinch for the ideal fit

Recommended Water Temps: 45F+

Sizing Tip: Order your regular shoe size or 1/2 size down. For example, if you are a size 10.5, order a 10. If you are a size 10, also order a size 10. NOTE: If your feet are exceptionally narrow or low volume, you may want to size down even more. 

Simply Game-Changing. Again.

We've changed the bootie-game again with our Solite 2.0 technology. The 5mm Custom integrates our 2.0 Sole in the cleanest, simplest package that essentially disappears on your feet. If you want the world's lightest, barely-there boot, the 5mm Custom 2.0 is your answer. Check the tech:

3D-Molded Natural Rubber Sole

Like all of our new 2.0 Series boots, the 5mm Custom 2.0 features a 3D-molded 1mm natural rubber sole, wrapping up the toes and heel for increased durability and protection against rocks, urchins, and reef. The one-piece sole design leaves no exposed gaps between sole pods, insuring extra protection and durability.

Custom-Fit 2.0 Thermofoam Sole with Internal Micro-Split  

Our patented heat-moldable 2.0 Thermofoam sole has also been completely redesigned including a more comfortable Micro-Split internal split toe. The Micro-Split is only 1cm long, providing round-toe warmth with split-toe response. The Thermo Foam Sole is 6mm thick in the toes/heels for extra protection and 5mm elsewhere.

Upgraded Neoprene Lining with Tatex Flex-Spine

Updates to the Custom 2.0 aren't limited to the sole. We've also upgraded the outer lining material to the same one we use on the Custom Pros, improving durability and minimizing water absorption. Further fortifying the exterior is our exclusive Tatex Flex Spine. The Flex Spine stiffens the back of the boot, acting as a shoe-horn for easy entry and also providing a sticky surface to grab your wetsuit leg and prevent flushing. The inside is lined with a plush quick-dry lining material for max airflow, improving warmth and comfort.

EZ-O Cuff with Overkill Seams

Our EZ-O Cuff design provides a seamless barrier against flushing with a larger panel than other o-ring seals, providing much easier on-off and reducing stress on the seams. To reduce bulk under the wetsuit leg and allow for easier on-off, the EZ-O panel is reduced to 3mm thickness. Since booties take serious abuse, we cut no corners on our neoprene seam construction. Our Overkill neoprene seams are triple-glued, blind-stitched, then sealed on the exterior with liquid seam seal for maximum durability and longevity.

Reinforced Stealth-Loop

To ease on/off, we've integrated our low-profile Stealth-Loop in the heel. The Stealth Loop is laminated between the neoprene and our co-molded rubber/textile heel reinforcement patch, providing incredible durability and pull-strength. The Stealth Loop is also Tatex-coated for extra strength and zero-water absorption. 

Split-Toe Heat-Booster Socks in the Box

The unsung hero of our Solite "System", our Knit Split-Toe Heat-Booster Socks are included in the box. Knit from a Nylon/Poly/Spandex blend, the Heat-Boosters stay warm and comfortable when wet. Benefits of the Heat Boosters are numerous:

1. Makes boots easier on-off and reduces stress on seams.
2. Increases comfort by providing a soft barrier between the feet and the Thermofoam sole.
3. Adds warmth to extend session length and comfort.
4. Absorbs excess water from flushing to prevent puddling in the boots.
5. Absorbs bacteria to reduce bootie-stink.
6. Machine wash and dry for convenience.

Thickness 3mm

SKU XB30V-19

Using the VYRL CRYO 7 and VYRL 5MM boots as inspiration, Hyperflex designed the VYRL 3MM boot using a soft and minimal design approach. Thin and light weight are the predominant words here. The boot provides all the necessary warmth while maintaining the best barefoot feel available.

FEATURES
• 100% lined with Fire Fleece™ the same heat retaining lining used in the 5/4 winter suits.
• Fusion welded seams.
• Locking internal skin entry cuffs.
• Dual axis instep strap allows for maximum torque and comfort adjustments.
• Integrated multi-layer sole, heal and toe layers are vulcanized as a unit to provide maximum support while not compromising flexibility.
• Wide finger loop above heel for easy on and off

SurfEars 3.0

SurfEars, earplugs that let sound in and keep water out. They come with changeable parts in different sizes that allow you to customize them for your ears in order to find a comfortable and secure fit. Suitable for surfing, swimming, white water kayaking, diving, wake boarding  and other water activities.

What's In The Box

One Pair of SurfEars, pre assembled with medium gels, large wings and an adjustable leash

6 sealing gels, 2x size large, 2x size small, 2x size x-small

Two support wings, size small

An awesome storage case to keep them safe

When the best surfing is on winter's coldest days, what do you do? You throw on the Vissla 7 Seas 7mm Mittens and buck the cold with 7mm of warmth and quick dry furnace lined mittens.

Made for cold water: 48° F and below / 9° C and below
Glove should fit snug to prevent water from entering; see images above for sizing info

• Superfit gloves with wind resistant duramax exterior
• Full thermal hollow lining insulates heat and dries fast
• Silicon board grip palms with Vissla logo
• Smooth skin gloves with water tight cuffs
• Glued and blind stitched with taitex sealed seams

High performance core features, classic silhouettes, and throwback styling.

• Back Zip
• Retro Styling
• Strategic Seam Placement
• Wind-Proof Smoothskin
• Single Seal Collar
• Flatlock Stitched Breathable Seams
• Ultraflex Neoprene

Stay covered Head-to-Toe in O'Neill's premium lineup of equipment designed to shield you from the harshest conditions. Our world-class athletes search the planet for perfect surf, the R&D team at Area 52 developed product to allow you to perform in the most extreme elements and excel in the coldest climates.

• Round Toe Design
• Durable Outsole
• Strap-Free Design
• Interior: FluidFlex
• Exterior: FluidFlex
• Glued and Blindstitched Seams

O'Neill's New Blueprint Series continues our legacy of innovation with premium quality features and high tech construction using the most sustainable materials currently available. O'Neill is firmly committed to offering the closest thing to truly environmentally responsible products. The Blueprint Neoprene feature our Exclusive Recycled TechnoButter 3X neoprene. It weighs 20% lighter with 30% less water absorption than any other premium recycled neoprene.

Designed to Keep You Off The Wall and in the Water

This is the boot you’ve been waiting for. Built to exceed the needs of our team, every inch and every stitch has been crafted for comfort and performance to bring your style to life in all conditions. Placing a premium on boardfeel and grip, the Surf Boot 2 Hi V 5mm takes everything we know about skate shoes and packages it up in a surf bootie. Pure performance never looked so good.

• High-top surf boot

• 5 mm neoprene

• Round toe construction for universal fit

• Liquid rubber dipped around the foot shape for warmth and support

• Hook-and-loop strap for maximum adjustability

When the best surfing is on winter's coldest days, what do you do? You throw on the Vissla 7 Seas 7mm Mittens and buck the cold with 7mm of warmth and quick dry furnace lined mittens.

Made for cold water: 48° F and below / 9° C and below
Glove should fit snug to prevent water from entering; see images above for sizing info

• Superfit gloves with wind resistant duramax exterior
• Full thermal hollow lining insulates heat and dries fast
• Silicon board grip palms with Vissla logo
• Smooth skin gloves with water tight cuffs
• Glued and blind stitched with taitex sealed seams

Ultimate Warmth models of our wetsuits and jackets - perfect for colder conditions

80% NEOPRENE 20% NYLON

Style # MW02SNOR

DESCRIPTION

DESCRIPTION